15Khz RGB CGA YUV Component Video YCbCr to VGA Converter Scaler
15Khz RGB CGA/Component YCbCr to VGA Converter Scaler
This RGB to VGA converter scaler unit can up convert the older 15Khz CGA type RGB videos
or standard Component video to high-resolution VGA format for display on VGA
monitor, project or LCD TV with VGA input..
Great replacement display solution for those older CGA type RGB equipments or
video devices with component video outputs.
If users want to use the modern LCD flat panel display for their legacy RGB source, this converter provides the right
solution. Glitch-free conversion with high resolution output display of sharp frames and fine pixels.
It digitizes the incoming
interlaced analog video signals and
up converts them to progressive scan VGA or RGBHV format with perfect image output quality.
15Khz CGA
RGB To VGA Converter
All the legacy CGA type RGB devices can be up converted nicely at 1366×768,
1024×768 or 640×480 pixels for displaying on VGA monitor, projector or LCD TV via VGA connection.
The specific analog CGA type RGB
video inputs accepted by this converter including those RGsB, RGBS, RGBH/V and
RGBH+V type with horizontal frequency 15.73 or 15.62
KHz and vertical at 60 or 50 Hz.
All those arcade game boards or
older gaming computers such as Amiga that can output in such CGA
specification as mentioned above can now be converted to selectable VGA pixels
and displayed on LCD VGA monitor.
[Note]:
The
DB 9-pin to D-sub 15-pin VGA input adapter cable is sold separately.
Component
YCbCr Video
To VGA Converter
This CGA RGB to VGA scaler converter also supports non-HD type component YCbCr video
at 480i or 576i type signals from sources
such as DVD players, satellite receiver, digital media players and so on.
[Note]:
480p, 576p progressive scan or HD type 720p/1080p type component video feeds are
not supported by this converter.
The component video
input adapter cable is included in the package.
SD 480i 576i YUV To VGA
Converter
Analog YUV type component RGB video signals
can also be up converted into progressive scan VGA/RGBHV type and scaled up to 1024×768 pixels or 1366×768 pixels.
Major legacy video game consoles with interlaced component video outputs including:
Gamecube at 480i/576i mode
Xbox and Xbox 360 at 480i/576i mode
PlayStation 2 PS2 at 480i/576i mode
Nintendo Wii at 480i/576i mode
All of them can be up converted to high
resolution VGA format for VGA display.
Supports 4:3 And 16:9 Wide Screen VESA/VGA Displays
This RGB to VGA converter is featured as
the only product in the market that supports true 16:9 output with native wide screen resolution
at 1366×768 pixels  for wide-screen type LCD TV or LCD/TFT monitor or 1024×768 pixels output for standard 4:3 CRT monitor
displays.
Advanced 3D Motion
Adaptive De-interlacing
With the motion adaptive de-interlacing technology, this unit easily converts the interlaced RGB signals into progressive ones (scanned every line).
Users
shall find pictures much less flickering with more graphical presentation. This unit also adopts a variety of technologies including automatic 3:2/2:2 file
mode detection and non-linear scaling to enhance the picture quality for sharp and clear output.
Great and cost efficient
replacement display solution for older CGA type RGB equipments using new flat LCD
monitors for display.
The only product in the market that supports true 16:9 output with native wide
screen resolution at 1366×768 pixels
for LCD TV or LCD/TFT monitor size larger than 17″.
Supports all standard CGA type RGB signals that have
15.73/15.62
KHz(Hf) with 50/60hz(Vf)
support all non-HD
type component RGB video at 480i or 576i
New design for
wider
Hf/Vf range support
in game board timing.
High resolution output
with low noise and fine pixels.
Play arcade video games at high resolution on CRT/LCD/TFT monitor, projector, LCD TV or HDTV via VGA connection.
Supports RGB inputs from all major game consoles including Gamecube, PlayStation 2, Nintendo Wii, Xbox and Xbox 360.
Supports legacy computer devices such as
Amiga, Atari, etc with compatible
CGA RGB output spec.
Enhance standard component
video at 480i/576i from DVD player, DVR, satellite or game consoles to progressive scan
VGA resolution.
Supports
RGsB, RGBS,
RGBH/V and RGBH+V
composite sync with sync level above 2 vpp, 75 Ohm.
2 selectable video
inputs
, CGA RGB input and
component RGB video input
3 selectable VGA output
resolutions
, 640×480, 1024×768 and 1366×768 pixels
.
Auto
50/60Hz scan rate conversion
.
Auto
3:2/2:2 file mode detection.
Supports 4:3 and 16:9 widescreen VGA and VESA displays.
Input RGB
Connector:
D-sub 15-pin VGA female x 1
Component 3 RCA male x 1, through
Dub 15-pin to 3
RCA  adapter cable
Input RGB Signals:
RGB: 0.7 Vp-p 75 ohm
H sync/ V sync: 2 Vp-p 75 ohm
YCbCr: 1 Vp-p(Y), 0.7 Vp-p 75
ohm(CbCr)
Input RGB Timing Support:
Analog CGA: Horizontal 15.73/15.62
KHz + Vertical 60/50 Hz Non-interlace
480i RGB: Horizontal 15KHz + Vertical 60Hz/Interlace
576i RGB: Horizontal 15KHz + Vertical 50Hz/Interlace
Input RGB Formats:
RGsB (Sync on G)
RGBS
RGBH/V
RGBH+V with sync level above 2 Vpp
YCbCr/YUV
VGA Output Connector
: D-sub 15-pin VGA female x 1
VGA Output Signals and Timings:
VGA 640×480 pixels @ 60Hz
XGA 1024×768 pixels @ 60Hz
WXGA 1366×768 pixels @ 60Hz
(wide-screen mode)
Power Supply:
AC Input: 110V-240V 50-60Hz
DC Output: DC 5V, 1.2A, center positive
15Khz CGA RGB to VGA converter scaler
Power adapter
User manual
Input adapter
cable for component video
For
those 15Khz RGB devices with DB 9-pin outputs,
we suggest you to order
our proprietary adapter cable to avoid problem or you may prepare the input cable based upon the following
spec.
The following diagram shows the corresponding
pin-out assignment for the DB 9-pin outputs that our adapter cable can pass. A correct 9-pin to 15-pin adapter cable can be constructed
with matching the following diagram: